|  |  | | | | | Buy NEW! Pegasus III Infrared & Serial 56K V.90+ Data/Fax Modem (PP2I-5600B) | | Rate This Item | | | | | | | | · ITEM CODE : | 190-001-001 | | | | | | | |
|
|
|
|
|
 |
Infrared & Serial 56K V.90+ Data/Fax Modem with Power Saving Mode
PP2I-5600B is a V.90 modem with IrDA Infrared port in addition to RS232 port. It comes with a 100 - 240V AC adaptor and built-in battery compartment for 4 AAA rechargeable batteries. PP2I-5600B also has a small circuit within for automatic power saving operation to give a 2 to 3 time longer battery life compared with that of 3JTech's older versions of Infrared modems.
PP2I-5600B is ideal for PDA's, Tablet PC's ...etc. which have Infrared port. It could also be used with devices like desktop PC's through serial port.
Part Number: PP2I-5600B (Pegasus III Infrared Modem)
Dimensions: 65mm X 95mm X 21mm
Battery: AAA 1.2V rechargeable batteries (x4)
Travel charger: 100V-240VAC, 6.0VDC
Dual operating modes: Infrared or serial RS-232
Works with: Palm Pilot, Macs, Digital Cameras, PCs, Notebooks.
Compliance: IrDA 1.0 standard for serial infrared (SIR) data communication
Link distance: 1 cm to 1.0 m
Angle of Infrared: +/- 15 deg.
Firmware: Downloadable from the host/DTE and downloadable MDP code modules from the MCU
Data modem:
- ITU-T V.90
- V.34 (33.6 kbps), V.32 bis, V.32, V.22, V.23, and V.21; Bell 212A and 103
- ITU-T V.42 LAMP, MNP3,4 error correction
- ITU-T V.42b and MNP5 data compression
- Fax modem send and receive rate up to 14.4 kbps
- V.17, V.29 ter, and V.21 channel 2
Software compatible AT commands sets
NVRAM directory and stored profiles
Supports Serial PnP interface per Plug and Play External COM Device
Flow control and speed buffering
Automatic format/speed sending
Power Consumption: Normal: 110~130 mA;
Power-saving mode: no data transmission after 5s: 60 mA; auto shut down after 3 minutes off line
|
|
 |
|
|
|
|
|
|
|
 |
 |
|
|
 |
|
|
