|  |  | | | | | Buy Bluetooth Hands Free Car Kit with Build-in Speaker & Microphone, 1 external microphone included, Wireless Bluetooth Class 2 Device, High Efficient Hands-free Car Kit, Safety and Comfot solution on the road | | Rate This Item | | | | | | | | · ITEM CODE : | 200-016-001 | | | | | | | |
|
|
|
|
|
 |
Safe driving and easy communication solution on the road. Works with any Bluetooth enabled Cell Phones/PDAs. High efficent Must-Have. This innovative product combines a Bluetooth class 2 module with a voice processing chipset to implement Bluetooth Handset/Hands-free Profile for in-car usage. The features of the hands-free Car Kit makes for easy communication and safe driving environment. Simply plug the car kit into your 12 volt cigarette lighter and pair with your Bluetooth mobile phone. From then on, you can receive any calls with this kit. It provides 3 simple TALK/END/PAIR buttons for function maneuver. The integrated echo cancellation chipset helps the Bluetooth Car Kit to achieve outstanding sound quality. The Bluetooth Car Kit universally supports 99% of all Bluetooth enabled phones with no in-car hardwiring required, thus making it the best in-car mobile hands-free solution.
Features: - Bluetooth qualified Specification v1.1 compliant
- Supports both Headset and Handsfree profile
- Onboard Advance DSP for echo cancellation and ambient noise reduction
- Easy operation with only 3 buttons: Talk, End, and Pairing
- Powered from 12v cigarette lighter, on a hinge for 120° movement
- Volume adjustment: Large volume knob for easy maneuver
- Speaker gain up to 120dB
- 1 internal microphone and 1 external microphone
- Button with LED indication
Specification: - General Radio: Carrier Frequency: 2.402 ~ 2.480 GHz date Rate: 1 Mbps
- Bluetooth Protocol: Bluetooth Class 2, up to 10 meters (in open space)
- Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum)
- Modulation Method: GFSK (Gaussian Frequency Shift Keying)
- Profile Supported: Headset Profile (HSP) Hands-free Profile (HFP)
- Bluetooth Sensitivity: -82dBm
- Bluetooth RF Output Power: 2 dBm maximum.
- Mechanical Dimension : 170 x 58 x 46 mm (L x W x H)
- Certification: FCC, CE Class B, BQB, E-mark
- Environmental: Operating Ranges
Operating: Temperature : 0° to 40° C (32° to 104° F) Humidity: 10 ~ 90%
Storage: Temperature : -10° to 65° C (14° to 149° F) Humidity: 10 ~ 90% - Power Consumption
Typical: 140mA@12
Maximum: 180mA@12V
Idle: 115mA@12V - Buttons/Switch:
Slide switch: Power ON/OFF
Main buttons: TALK/END/PAIR. - LED Indication: 3 differentiate blue LED indicating TALK/END/PAIR button Flashing blue LED indicating pairing/connection mode
- Driver Support: No drivers required
Codec Specification: - Superior full duplex
- Programmability through an external EEPROM
- Noise suppression up to 15dB
- 16 bit linear PCM format for Bluetooth controller
- Cancel non-linear echo
- Noise suppression convergence time: 1~2 seconds
- Echo convergence time: 200ms
- Programmable gain controls for speaker and microphone
|
|
 |
|
|
|
|
|
|
|
 |
 |
|
|
 |
|
|
